Power Cable 600 or 1000 Volt Single Conductor Copper, Cross Linked Polyethylene (XLPE). Silicone Free

CONSTRUCTION:

1.      Conductor: Solid or Class B compressed stranded bare copper per ASTM B3 and ASTM B8

2.      Insulation: Cross Linked Polyethylene (XLPE)

APPLICATIONS AND FEATURES:

APPLICATION

Southwire XHHW-2 copper conductors circuit sizes are primarily used in conduit, or other recognized raceways, and branch circuit wiring, as specified in the National Electrical Code. XHHW-2 copper conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 conductors is 600 volts or 1000 volts. Suitable for use in Health Care Facilities per Section 517.160 of the National Electrical Code where a dielectric constant of less than 3.5 maybe specified.

FEATURES

-  SIS - Sizes 14 AWG through 10 AWG

-  RoHS Compliant

SPECIFICATIONS:

•  ASTM B3 Soft or Annealed Copper Wire

•  ASTM B8 Concentric-Lay-Stranded Copper Conductors

•  UL 44 Thermoset-Insulated Wires and Cables

•  ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

•  Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

•  Federal Specification A-A-59544

•  NMX-J-451-ANCE Thermoset insulated wires and cables

•  NOM-063-SCFI Electrical Products – Conductors – Safety Requirements

NEMA 70901-2-2024 Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable